![\"Lanchbury](\"http:\/\/www.lanchbury.id.au\/wp-content\/uploads\/2011\/03\/Cisco1.jpg\" "\\"CiscoPOTS\\"")
<\/a><\/p>\nThis is the more regular setup of a Cisco router, so if your looking for a config for a Amnet connection try the below.\u00a0 Copy the below text into notepad, edit the {brackets} and then paste it into a Cisco’s Configure Terminal prompt.<\/p>\n
<\/p>\n
no service pad
\nservice timestamps debug datetime msec
\nservice timestamps log datetime msec
\nservice password-encryption
\n!
\nhostname {router-name}
\n!
\nboot-start-marker
\nboot-end-marker
\n!
\nenable secret {enable-password}
\n!
\nno aaa new-model
\n!
\n!
\n!
\n!
\nip cef
\nip auth-proxy max-nodata-conns 3
\nip admission max-nodata-conns 3
\nip domain lookup source-interface Dialer0
\nip domain name {local-domain-name}
\nip name-server {local-dns-server or 203.161.127.1 and\/or 203.153.224.42}
\n!
\nvpdn enable
\n!
\nvpdn-group pppoe
\nl2tp tunnel receive-window 128
\n!
\n!
\n!
\nusername {username} privilege 15 secret {user-password}
\n!
\n!
\narchive
\nlog config
\nhidekeys
\n!
\n!
\n!
\n!
\n!
\ninterface ATM0
\nno ip address
\nno atm ilmi-keepalive
\ndsl operating-mode adsl2+
\nno shutdown
\n!
\ninterface ATM0.1 point-to-point
\ndescription PPPOE WAN Interface
\npvc 8\/35
\npppoe-client dial-pool-number 1
\n!
\n!
\ninterface FastEthernet0
\ndescription Connected to Switch
\nno shutdown
\n!
\ninterface FastEthernet1
\n!
\ninterface FastEthernet2
\n!
\ninterface FastEthernet3
\n!
\ninterface Dot11Radio0
\nno ip address
\nshutdown
\nspeed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
\nstation-role root
\n!
\ninterface Vlan1
\nip address 172.17.2.1 255.255.255.0
\nip nat inside
\nip virtual-reassembly
\n!
\ninterface Dialer0
\nip address negotiated
\nip nat outside
\nip virtual-reassembly
\nencapsulation ppp
\ndialer pool 1
\ndialer-group 1
\nppp authentication chap callin
\nppp chap hostname {amnet-username}@amnet
\nppp chap password {amnet-password}
\n!
\nip forward-protocol nd
\nip route 0.0.0.0 0.0.0.0 Dialer0
\n!
\nno ip http server
\nno ip http secure-server
\nip nat inside source list 1 interface Dialer0 overload
\nip nat inside source static tcp 172.17.2.{host} 80 interface Dialer0 80
\nip nat inside source static tcp 172.17.2.{host} 443 interface Dialer0 443
\n{add in any more port forwards you want applied here with the above syntax}
\n!
\naccess-list 1 permit 172.17.2.0 0.0.0.255
\n!
\ncontrol-plane
\n!
\nbanner motd ^CCC
\n**************************************************
\n* Access to authorized personnel only *
\n**************************************************^C
\n!
\nline con 0
\nexec-timeout 30 0
\npassword {console-password}
\nlogging synchronous
\nlogin
\nno modem enable
\nline aux 0
\nline vty 0 4
\nexec-timeout 30 0
\npassword {remote-password}
\nlogging synchronous
\nlogin local
\ntransport input ssh
\n!
\nscheduler max-task-time 5000
\nend
\n<\/code><\/div>\n","protected":false},"excerpt":{"rendered":"I recently posted a Cisco config on a bridge mode ADSL2+ modem.\u00a0 Well as I’m a IT Consultant, I get my hands on a fair bit of hardware.\u00a0 Well this weekend I’ve had a unit that needed testing, as it was failing to transfer data across it’s ADSL link.\u00a0 Fortunately for me it wasn’t faulty, … <\/p>\n